Products Selector > Firesleeve Products
Stainless Steel Firesleeve Clamps
Firesleeve Clamp Tool
Firesleeve Clamps & Tools
Securing firesleeve to hoses and cables
When it comes to securing firesleeve onto hoses and fittings, using the correct clamps can make all the difference. Clamps not only ensure a snug fit to the hose or fitting, but help to prevent the firesleeve from pulling off of the fitting if the firesleeve experiences tension due to hose flexing. Various hand tools can be used to secure the clamps, but the designed tool make the installation fast and easy.
It is important not to overtighten clamps as the edges of the clamp can cause fracture of the silicone if the compression is too high. In some cases it is better to use a wider clamp or 2 clamps in order to reduce the stress on the firesleeve coating. Fractures of the coating can be repaired by using the sealant paste or dip or the end wrap tape.
SecurClamp
Two styles of clamp are available to secure the ends of firesleeve to fittings; Free-end self locking style and Twice-around style.
SecurClamp Tools
The ends of clamps can be pulled to tighten the clamp with common tools, or the specially designed clamp tool can be used.
Clamps:
Clamp Tools:
Firesleeve Stainless Self Locking Clamp
Firesleeve End Seal Tape
Part Numbers:
Free End Clamps:
C-SSSL-316-W181-L06, C-SSSL-316-W181-L08, C-SSSL-316-W181-L10, C-SSSL-316-W181-L14, C-SSSL-316-W181-L20, C-SSSL-316-W181-L27; C-SSSL-316-W311-L08, C-SSSL-316-W311-L11, C-SSSL-316-W311-L14, C-SSSL-316-W311-L20, C-SSSL-316-W311-L27
Twice Around Clamps: